> For the complete documentation index, see [llms.txt](https://help.pixfizz.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.pixfizz.com/products-and-design/designs/element-substitutions-for-blend-modes.md).

# Element Substitutions for Blend Modes

Element substitutions now support blend mode rules, allowing you to automatically swap or adjust design elements based on their blend mode.

### Where to find it

Admin → Products → Element Substitutions.

### What it does

* Adds blend mode as a condition or action within element substitution rules.
* Allows you to define substitution logic that triggers based on the blend mode applied to an element — or that changes an element's blend mode as part of the substitution.

### When to use it

* **Production compatibility** — substitute elements that use a blend mode not supported by a specific production workflow. For example, if a fulfillment partner's RIP cannot handle `overlay` blending, substitute those elements with a pre-flattened alternative.
* **Design-to-print adjustments** — automatically swap blend modes between what looks good on screen and what reproduces well in print (e.g. replacing `screen` with `normal` for certain substrates).
* **Template reuse across product types** — use the same design template for multiple products but substitute blend mode behaviour depending on the output type (e.g. foil print vs standard print).

### Notes

* Element substitutions are configured at the product level, not the template level. They apply to all designs under the product.
* Blend modes available in the design tool are documented in `17_DESIGN_TOOL.md` § Blend Modes.
